Flex 1 with Agitation Precision Cleaning
Elmasonic Flex 1 Features
- Precise oscillation yields faster, more thorough cleaning and increased throughput
- Degasses new solutions to increase cleaning efficiency at the outset
- Sweep and pulse modes improve cleaning uniformity and effectiveness
- Multi-frequency options meet all cleaning requirements
- Time and temperature control optimizes cleaning cycles
- Optional shower rinse station for post-cleaning wash down
Available Flex 1 Tank Sizes
| Model Number | Capacity (gallons) | Inside Tank Dimensions (L x W x H inches) |
|---|---|---|
| X-tra Pro 300 | 8.5 | 11.7 x 13.1 x 10.4 |
| X-tra Pro 550 | 14.6 | 11.6 x 19.7 x 12.1 |
| X-tra Pro 800 | 22.4 | 11.6 x 19.7 x 18 |
| X-tra Pro 1200 | 29.8 | 20.4 x 23.6 x 12.6 |
| X-tra Pro 1600 | 44.5 | 20.4 x 23.6 x 18,.7 |
Note: These tank sizes apply to both Flex 1 and Flex 2 models which are comprised of X-tra Pro tanks.
Elmasonic Flex 1
Maximum Cleaning Effectiveness and Process Control
Tovatech proudly presents the Elmasonic Flex 1 single stage industrial ultrasonic cleaner. The superior features of the Flex 1 allow you to dramatically improve cleaning effectiveness and increase your cleaning cycle speeds by 20% depending on the particular cleaning requirement.
Is your small manufacturing operation still using manual cleaning to meet very demanding cleanliness requirements? Switching to the Elma Flex 1 will significantly reduce your cleaning costs.
10 Options to Achieve Perfection
The Elma Flex 1 is offered in 5 tank sizes and 2 frequency pairs to give you a broad choice in specifying an industrial ultrasonic cleaner delivering the ultimate cleaning performance.
- Tank capacities 7, 10, 17, 19 and 30 gallons
- Ultrasonic frequencies 25/45 kHz and 35/130 kHz
Match the Frequencies to the Job
- 25 kHz for coarse removal of lapping and polishing media
- 45 kHz for fine removal of oil and grease in industrial, craft and jewelry manufacturing
- 35 kHz for removal of oil and grease from metal, glass and hard precious stones, or general purpose reliable thorough cleaning
- 130 kHz for sensitive surfaces in jewelry and electronic component cleaning
Additional features
- Manual setting of ultrasonic intensity
- User-friendly operation by keys and displays
- Timer controlled cleaning, user-defined switch-off and auto shutoff after 12 hours
- Bath temperature control from 30 to 80ºC (86 to 176ºF); safety shut-off at 90ºC
- Liquid-level monitor; low-level auto-shutoff
- Cavitation-resistant stainless steel for long service life
.